Drill Press Safety and Maintenance

The drill press is a very useful and handy machine if you have one for home use. There are a couple of cardinal rules that one has to follow. These in point form are as follows:

1. Make sure that the drill press is either securely fixed to the work table or to the floor depending on what model you have.
2. Always use a vice or a clamping kit. The vice must be properly secured to the adjustable table.
3. Make sure that the belts are in their correct position on the pulleys and that the tension is correct. The top cover must always be securely closed.
4. The drill bit must be properly secured in the chuck by using the chuck key that is provided. It is always better to do the securing of the bit by moving the chuck to at least two of the guide holes in sequence while securing with the key.
5. The work piece that you wish to drill into must be securely held by the vice or clamping kit.
6. It is advisable to mark the exact spot that you wish to drill into with a center punch. This will help you to line the drill bit up so that you drill the hole in the right place.
7. Select the correct speed and then use the side feed handles to engage the work piece.

The pressure exerted must be steady and consistent for maximum efficiency. Drill the hole to the required depth or through the work piece. Never stop and start while drilling as this leads to heat build up. The drill must be withdrawn from the hole before stopping.
Your drill press requires very little maintenance. Make sure that you clean up especially on the table. Check the belts for wear and tear and replace when necessary.
On the safety side you should always wear safety goggles and protective gloves while drilling. No long sleeved shirts or jackets should be worn. Always switch the machine off at the wall and if you can, remove the plug when you leave your work place.

Conclusion

So you can see getting the right drill press that suits your requirements can be a hard hitting and a confusing decision, since there are a lot of significant factors that have to be considered. Therefore, it is strongly recommended that when you are choosing the ideal drill press for your work place, it is essential not to consider only the price factor, make sure you give a complete thought on the kind of work and efficiency the drill is offering. With these top of the class drill press reviews, you might surely make a great decision and buy the product which suits you the best.